Specifications

396
Syntax: CALL "SYSTEM.FN3" .fcFontInf N.FONT%,VERSION$()
Description:
This function returns font information--the number of downloaded
fonts, font name, font size, and font version.
Parameter: (None)
Returned value: N.FONT% Number of fonts
VERSION$ Sets of the font name, font size, and font version in
the following format
Note: If the number of elements of VERSION$ is less than the number of
fonts, then the SYSTEM.FN3 returns the sets of the font information
by the number of elements.
Syntax: CALL "SYSTEM.FN3" .fcCReset
Description: This function resets the LAN-support CU settings to the power-on
default.
Parameter: (None)
Returned value: (None)
Note: You need to open the IrDA communications device file with OPEN
"COM:" statement beforehand.
Run-time errors:
.fcFontInf Get font information
.fcCReset Reset the LAN-support CU to the power-on default
Error code Meaning
34h
Bad file name or number
(The communications device file is not opened.)
105h
Power-off detected
Font name Font size Font version
8 bytes 2 bytes 8 bytes