Specifications

390
16.2.2 Detailed Function Specifications
Syntax: CALL "SYSTEM.FN3" .fcSysIGet PARA%,DATA%
Description:
This function reads numeric data (DATA%) from the system menu
item specified by
PARA%.
Parameter: PARA% Item number of the system menu
Returned value: DATA% Numeric data read from the specified system menu item
System menu items list:
.fcSysIGet Read numeric data from System Mode settings
Item number
(PARA%)
System menu item
Attribute
*1
DATA%, numeric data of
the system menu item
Initial
value
.sySFMode 1 Shift key mode R/W .sySFNlock 0 Nonlock 0
.sySF1time 1 Onetime
.syM1key 2 Assignment to M1 key R/W .syMkyNone 0 None 0
.syMkyEnt 1 Enter key
.syMkyTrg 2 Trigger switch
.syMkySF 3 Shift key
.syMkyBL 4 Backlight on/off function key
– 5 (Reserved for system)
.syM2key 3 Assignment to M2 key R/W Same as above. 0
.syM3key 4 Assignment to M3 key R/W Same as above. 2
.syM4key 5 Assignment to M4 key R/W Same as above. 2
.syBarInvt 6 Black-and-white
inverted label reading
function
R/W .syInvtOff 0 OFF 0
.syInvtOn 1 ON
– 7 (Reserved for system) –
.syDecdLvl 8 Decode level R/W 1 to 9 4
.syITFMin 9 Minimum number of
digits to be read for
ITF
R/W 2 to 20 4
.sySTFMin 10 Minimum number of
digits to be read for
STF (BHT-100B only)
R/W 1 to 20 2
.syNW7Min 11 Minimum number of
digits to be read for
Codabar
R/W 3 to 20 4
*1
R/W: Read and write possible
RO: Read only