Specifications

Chapter 16. Extended Functions
389
16.2 Reading or writing system set-
tings from/to the memory
(SYSTEM.FN3)
16.2.1 Function Number List of SYSTEM.FN3
The SYSTEM.FN3 may read or write system settings depending upon the function number
specified, as listed below.
Note: Functions #11, #12, and #21 take effect only when the LAN communi-
cations software is installed to the BHT.
Function number Used to:
.fcSysIGet
1 Read numeric data from System Mode settings
.fcSysISet
2 Write numeric data to System Mode settings
.fcSysSGet
3 Read string data from System Mode settings
.fcSysSSet
4 Write string data to System Mode settings
.fcFontInf
5 Get font information
.fcCReset
11 Reset the LAN-support CU to the power-on default
.fcCLkGet
12 Get link status between the BHT and the LAN-support CU
.fcCMdRqst
21 Place the LAN-support CU in system reconfiguration mode