Specifications

Chapter 2. Development Environment and Procedures
21
[ 2 ] Select an existing project file
You may select an existing project file in the Select Project File dialog box or in the Open File
dialog box.
Selecting in the Select Project File dialog box
(1) In any of the following methods, display the Select Project File dialog box shown below:
■ From the File menu, choose the Open Project command.
■ Click the open project button (yellow) in the toolbar.
■ While holding down the Ctrl key, press the P key.
(2) Select an existing project file you want to use (Projtest.bhp in this example), and then
click the Open button.
(3) Proceed to Section 2.4.4, "Compiling and Building."
Selecting in the Open File dialog box
(1) Display the Open File dialog box, referring to Subsection 2.4.3.1, [ 1 ].
(2) Select an existing project file you want to use (Projtest.bhp in this example), and then
click the Open button.
(3) Proceed to Section 2.4.4, "Compiling and Building."