Specifications

20
2.4.3.2 Designating a project file
To build a library out of a single source file or to build a user program or library out of multiple
source files, you need to create a project file (described in [ 1 ] later) or select an existing
project file (in [ 2 ]).
You may add files or delete existing files to/from the designated project file (described in [ 3 ]
and [ 4 ], respectively).
[ 1 ] Create a new project
(1) In any of the following methods, display the Create File dialog box shown below:
■ From the File menu, choose the New command.
■ Click the new file button in the toolbar.
■ While holding down the Ctrl key, press the N key.
(2) Designate a project file you want to create (Projtest.bhp in this example), and then click
the Save button.
If you create a project file having the same name as one already used, the warning mes-
sage dialog box will appear. If you want to overwrite, click the OK button; if you do not,
click the Cancel button to quit the project creating procedure.
(3) The Add File(s) dialog box appears. Into the newly created project, you need to put files
which should configure the project, according to the instructions given in [ 3 ], "Add files to
a project file."