Specifications

171
• The cursor size will be as shown below.
• An array integer variable--a work array, register array, or common array--for
cur-
sorarrayname
should be declared by the DIM, DEFREG, or COMMON state-
ment, respectively.
DIM cp0%(11)
DEFREG cp1%(11)
COMMON cp2%(11)
The array variable should be one-dimensional and have at least 12 elements.
Each element data should be an integer and stored in the area from the 1st to
12th elements of the array.
• If you specify
cursorarrayname exceeding the allowable cursor size (height:
no. of bits, width: no. of elements), the excess will be discarded.
• If the double-width, double-height, or quadruple-size is specified, then user-
defined cursors loaded by the
APLOAD will display in double-width, double-
height, or quadruple-size, respectively. For details, refer to Chapter 7, Subsection
7.1.3, "Dot Patterns of Fonts."
Display font Size (W x H) No. of elements
Standard-size 12 x 12 dots 12
0123 5678910114
LSB
MSB