Specifications

134
BHT-100B
The OPEN "BAR:" statement opens the bar code device. In this statement, you may spec-
ify the following bar code types available in the BHT. The BHT can handle one of them or
their combination.
*
1
Reading wide bars
EAN-13 and UPC-A bar codes may be wider than the readable area of the bar-code
reading window.
Such wider bars can be read by long-distance scanning. Pull the bar-code reading win-
dow away from the bar code so that the entire bar code comes into the illumination
range. (No double-touch reading feature is supported.)
*
2
Specifying Code 128 makes it possible to read not only Code 128 but also EAN-128.
Available Bar Code Types Default Settings
Universal product codes EAN-13*
1
EAN-8
UPC-A*
1
UPC-E
No national flag specified.
Interleaved 2of5 (ITF) No length of read data specified.
No check digit.
Standard 2of5 (STF) No length of read data specified.
No check digit. Short format of the start/
stop characters supported.
Codabar (NW-7) No length of read data specified.
No check digit.
No start/stop character.
Code 39 No length of read data specified.
No check digit.
Code 93 No length of read data specified.
Code 128 (EAN-128)*
2
No length of read data specified.