Specifications

[Issue No.] GOT-A-0064-C [Page] 6/39
[Title] List of Valid Devices Applicable for GOT2000 Series
[Date of Issue] Ver. C: February 2015 (First Edition: September 2013)
[Relevant Models] GOT2000 Series
HEAD OFFICE : TOKYO BUILDING, 2-7-3 MARUNOUCHI, CHIYODA-KU, TOKYO 100-8310, JAPAN
NAGOYA WORKS : 1-14, YADA-MINAMI 5-CHOME, HIGASHI-KU, NAGOYA, JAPAN
TECHNICAL BULLETIN
available.
*4: The OP-27937(2m) manufactured by KEYENCE CORPORATION is available.
*5: It is necessary to supply 24VDC to the barcode reader separately. For details, please refer to the manual of the barcode
reader to be used.
1) Cable connection diagram for a barcode reader manufactured by KEYENCE CORPORATION (BL-210RK)
The following shows connection cables that must be produced by the user.
Maximum cable length: confirm with the barcode reader manufacturer.
Barcode reader
Cable connection and signal direction
GOT
Signal name Pin No. Pin No. Signal name
SG 1 1 CD
RD(RXD) 2 2 RD(RXD)
SD(TXD) 3 3 SD(TXD)
ER(DTR) 4 4 ER(DTR)
SG 5 5 SG
DR(DSR) 6 6 DR(DSR)
RS(RTS) 7 7 RS(RTS)
CS(CTS) 8 8 CS(CTS)
5V 9 9 5V
2) RS-232 cable connection diagram for a barcode reader manufactured by KEYENCE CORPORATION (BL-601,
BL-U1)
The following shows connection cables that must be produced by the user.
Maximum cable length: confirm with the barcode reader manufacturer.
Barcode reader
Cable connection and signal direction
GOT
Signal name Pin No. Pin No. Signal name
FG 1
Connector case
SD 2 2 RD(RXD)
RD 3 3 SD(TXD)
RS 4 4 ER(DTR)
CS 5 5 SG
DR 6 6 DR(DSR)
SG 7 7 RS(RTS)
8 8 CS(CTS)
ER 20 9 ―