Specifications

[Issue No.] GOT-A-0064-C [Page] 38/39
[Title] List of Valid Devices Applicable for GOT2000 Series
[Date of Issue] Ver. C: February 2015 (First Edition: September 2013)
[Relevant Models] GOT2000 Series
HEAD OFFICE : TOKYO BUILDING, 2-7-3 MARUNOUCHI, CHIYODA-KU, TOKYO 100-8310, JAPAN
NAGOYA WORKS : 1-14, YADA-MINAMI 5-CHOME, HIGASHI-KU, NAGOYA, JAPAN
TECHNICAL BULLETIN
(1) Cable connection diagram and precautions for a printer manufactured by NADA ELECTRONICS, LTD.
(a) Connection cable diagram
The following shows connection cables that must be produced by the user.
(Maximum cable length: confirm with a printer manufacturer.)
Printer Cable connection and signal direction GOT
Signal name Pin No.
Pin No. Signal name
── ── 1 CD
RXD 2 2 RD(RXD)
TXD 3 3 SD(TXD)
── ── 4 DTR(ER)
GND 5 5 SG
── ── 6 DSR(DR)
RTS 7 7 RS(RTS)
CTS 8 8 CS(CTS)
── ── 9 NC
(b) Precautions
- Monochrome printing
- If printing is interrupted due to a turned-off printer, cable disconnection, and others, turn off and then on
the printer power, and perform the printing again.
- For printing with the report function, one-byte characters are printed as two-byte characters.
- For printing with the report function, the left margin setting of the print format is disabled.
- Since the printing paper is roll paper, the page break function is disabled.
(2) Cable connection diagram and precautions for a printer manufactured by SEIKO EPSON
CORPORATION
(a) Connection cable diagram
The following shows connection cables that must be produced by the user.
(Maximum cable length: confirm with a printer manufacturer.)
Printer Cable connection and signal direction GOT
Signal name Pin No.
Pin No. Signal name
── ──
1 CD
TXD 2 2 RD(RXD)
RXD 3 3 SD(TXD)
── ── 4 DTR(ER)
SIGNAL GND 7 5 SG
── ── 6 DSR(DR)
── ── 7 RS(RTS)
DTR 20 8 CS(CTS)
── ── 9 NC
(b) Precautions
- Monochrome printing
- If printing is interrupted due to a turned-off printer, cable disconnection, and others, turn off and then on
the printer power, and perform the printing again.
- For printing with the report function, the available left margin setting of the print format ranges from 0 to 67.