Specifications

[Issue No.] GOT-A-0064-C [Page] 36/39
[Title] List of Valid Devices Applicable for GOT2000 Series
[Date of Issue] Ver. C: February 2015 (First Edition: September 2013)
[Relevant Models] GOT2000 Series
HEAD OFFICE : TOKYO BUILDING, 2-7-3 MARUNOUCHI, CHIYODA-KU, TOKYO 100-8310, JAPAN
NAGOYA WORKS : 1-14, YADA-MINAMI 5-CHOME, HIGASHI-KU, NAGOYA, JAPAN
TECHNICAL BULLETIN
14. Printer
PictBridge compatible printers and serial printers are available for the GOT2000 series.
The following shows the correspondence of the GOTs, printers and software.
GOT Available printer Available software Reference
GT27, GT25 PictBridge compatible printer
GT Works3 Version1.105K or later
14.1
GT27, GT25, GT21 Serial printer GT Works3 Version1.105K or later 14.2
14.1 PictBridge compatible printer
To connect a PictBridge compatible printer to the GOT, the GT15-PRN printer unit is required.
The GT15-PRN printer unit only supports the connection to PictBridge compatible printers. Serial printers are
not supported.
To use a PictBridge compatible printer, write the package data to the GOT using the screen design software of
GT Works3 Version1.105K or later
.
Precautions
PictBridge compatible printers are available by mounting the GT15-PRN printer unit on the GOT. However, the
paper size, printable area, error handling, and others differ according to the printer models. For the details,
follow the printer manual.
(1) Paper size
Regardless of the paper size set on the GOT, an image on the GOT may be printed at the size set on the
printer.
When the paper size of the hard copy is specified other than the A4 size, an error may occur and the hard copy
cannot be printed. Set the paper size to A4.
(2) Printable area
When using the report function of the GOT, the printable area varies according to the printer.
By the printer specifications, the trimming process is performed and some specified lines may not be printed.
(The trimming process adjusts image dimensions to a full printable area specified for the paper size, and does
not print the unprintable areas.)
When some areas are not printed, adjust margins and lines by using the report function of the GOT in
accordance with the printer specifications. (Refer to the figure below.)
Example) When the number of lines is set to 70, and the first line and 70th line are unprintable
The printable
area of
the printer
Some specified areas
are not printed.
Because areas are
unprintable, both lines
are not printed.
1
2
3
3
68
69
70
The printable
area of
the printer
Upper margin
Number of lines
Bottom margin
By the GOT (Report function),
adjust margins and the number
of lines so that the specified
area is within the printable area.
1
2
66
67
68
When some of lines are not printed for the report function of the GOT, configure the printer setting with no
trimming. Doing so may print the lines correctly.