Specifications

[Issue No.] GOT-A-0064-C [Page] 31/39
[Title] List of Valid Devices Applicable for GOT2000 Series
[Date of Issue] Ver. C: February 2015 (First Edition: September 2013)
[Relevant Models] GOT2000 Series
HEAD OFFICE : TOKYO BUILDING, 2-7-3 MARUNOUCHI, CHIYODA-KU, TOKYO 100-8310, JAPAN
NAGOYA WORKS : 1-14, YADA-MINAMI 5-CHOME, HIGASHI-KU, NAGOYA, JAPAN
TECHNICAL BULLETIN
9.2.2 When using the RS-422/485 connection
The following shows the equipment to configure with different types of RFID controllers.
4
GOT
RS-422/485 cable
1
IC tag
2
RFID reader/writer
3
RFID controller
5
Option device of GOT
Manufacturer IC tag
RFID
reader/writer
RFID
controller
RS-232 cable
Option device
of GOT
OMRON Corporation
V600-D□ V600-H□ V600-CA5D□
Produced by the user
Refer to (1) below
- (Built into GOT)
GT15-RS4-9S
Produced by the user
Refer to (2) below
GT15-RS4-TE
V680-D□ V680-H□ V680-CA5D□
Produced by the user
Refer to (1) below
- (Built into GOT)
GT15-RS4-9S
Produced by the user
Refer to (2) below
GT15-RS4-TE
(1) RS-422/485 cable (D-sub, 9 pins) connection diagram for an RFID controller (V600/V680) manufactured
by OMRON Corporation
(a) For the RS-422 connection
The following shows connection cables that must be produced by the user.
Maximum cable length: confirm with the RFID controller manufacturer.
RFID controller
Cable connection and signal direction
GOT
Signal name Pin No. Pin No. Signal name
RDA(-)
1
1 SDA
RDB(+) 2 2 RDA
SDA(-) 3 3 RSA
SDB(+) 4 4 CSA
SG 5 5 SG
― ― 6 SDB
― ― 7 RDB
― ― 8 RSB
― ― 9 CSB
― ― ― FG
*For the cables between and , refer to the manual created by OMRON Corporation