Specifications

[Issue No.] GOT-A-0064-C [Page] 23/39
[Title] List of Valid Devices Applicable for GOT2000 Series
[Date of Issue] Ver. C: February 2015 (First Edition: September 2013)
[Relevant Models] GOT2000 Series
HEAD OFFICE : TOKYO BUILDING, 2-7-3 MARUNOUCHI, CHIYODA-KU, TOKYO 100-8310, JAPAN
NAGOYA WORKS : 1-14, YADA-MINAMI 5-CHOME, HIGASHI-KU, NAGOYA, JAPAN
TECHNICAL BULLETIN
4.2.5 System equipment (5)
GOT
Dedicated cable
2D code
r
eade
r
Power supply unit
Manufacturer 2D code reader Dedicated cable Power supply unit
KEYENCE
CORPORATION
TL-30
Included with a 2D code
reader
TL-U1
4.2.6 System equipment (6)
Manufacturer
2D code
reader
Dedicated cable
Power supply
unit
RS-232 cable
Cognex K.K. DataMan 200
CCB-84901-1003-
△
△
CPS-AC-POE1A-△
△
CCB-M8X4-△△
4.3 Compatible 2D code type
Only “QR code” is supported by the GOT.
4.4 How to read data by a 2D code reader
Please refer to the followings for the data transfer format (header/terminator settings and others) that can be
used in the GOT or the setting method to read data by a 2D code reader.
(a) Data transfer format (header/terminator settings and others) that can be used in the GOT.
(b) Setting to connect a 2D code reader to the GOT. ([Peripheral Setting] on GT Designer3(GOT2000))
(c) Setting to write the data, read by a 2D code reader, to the PLC CPU. ([Detail Setting] in the [Bar Code]
dialog box on GT Designer3(GOT2000))
Refer to the following.
➟
GT Designer3 (GOT2000) Screen Design Manual (SH-081220ENG)
(d) Setting the procedure from connecting a 2D code reader to the GOT until reading 2D code data.
Refer to the following.
➟ GOT2000 Series Connection Manual (Microcomputer, MODBUS Products, Peripherals) For GT
Works3 Version1 (SH-081200ENG)