Specifications

[Issue No.] GOT-A-0064-C [Page] 21/39
[Title] List of Valid Devices Applicable for GOT2000 Series
[Date of Issue] Ver. C: February 2015 (First Edition: September 2013)
[Relevant Models] GOT2000 Series
HEAD OFFICE : TOKYO BUILDING, 2-7-3 MARUNOUCHI, CHIYODA-KU, TOKYO 100-8310, JAPAN
NAGOYA WORKS : 1-14, YADA-MINAMI 5-CHOME, HIGASHI-KU, NAGOYA, JAPAN
TECHNICAL BULLETIN
4.2.3 System equipment (3)
Manufacturer
2D code
reader
Power supply unit RS-232 cable
IDEC AUTO-ID
SOLUTIONS
Corporation
GD4430-
□□
UL310-0515, or 5V power supply from
the GOT standard interface *2
CAB-350 *3
GD4430-
□□
-HD
GBT4430-
□□
MG1100i-2D 11-0387 or HK-CP13-A05 8-0736-80 *3
M3200i Series PSAA18U-120 8-0730-54 *3
DENSO WAVE
INCORPORATED
AT10Q-SM Included with a 2D code reader Included with a 2D code reader
Cognex K.K.
DataMan 750
DMA-24KIT-00, DM100-PWR-000 DM700-RS232-00
DataMan 750S
DataMan 8100 *1
DM100-PWR-00 DM8000-RS232-00
DataMan 8500 *1
Honeywell
International
Inc.
1900GSR-2 Included with a 2D code reader Included with a 2D code reader
*1: DataMan 8100/8500 requires the communication module DMCM-SERIALM-00.
*2: It is necessary to supply 5VDC to the 2D code reader separately. For details, please refer to the manual of the 2D code
reader to be used.
*3: To connect the 2D code reader to GT SoftGOT2000, connect the following USB/RS-232 conversion cables to a USB port
on the personal computer.
For the USB/RS-232 conversion cables, refer to Technical Bulletin FA-D-0036.
- DIFC-U2 (Diatrend Corporation)
- DAC01R2VD (Diatrend Corporation)
<Connection example>
[2D code reader (RS-232)] + [
RS-232 cable] + [DAC01R2VD] + [DIFC-U2] + [Personal computer (USB)]