Specifications
[Issue No.] GOT-A-0064-C [Page] 13/39
[Title] List of Valid Devices Applicable for GOT2000 Series
[Date of Issue] Ver. C: February 2015 (First Edition: September 2013)
[Relevant Models] GOT2000 Series
HEAD OFFICE : TOKYO BUILDING, 2-7-3 MARUNOUCHI, CHIYODA-KU, TOKYO 100-8310, JAPAN
NAGOYA WORKS : 1-14, YADA-MINAMI 5-CHOME, HIGASHI-KU, NAGOYA, JAPAN
TECHNICAL BULLETIN
3.2.8 System equipment (8)
4
1
Trigger switch
2
Dedicated cable
3 Terminal box
Barcode reader
GOT
RS-422/485 cable
Manufacturer Barcode reader Dedicated cable Terminal box RS-422/485 cable
IDEC AUTO-ID
SOLUTIONS
Corporation
DS2100N-1214
Included with a
barcode reader
CBX100
Produced by the user
Refer to 1) below.
1) RS-422/485 cable connection diagram for a barcode reader manufactured by IDEC AUTO-ID SOLUTIONS
Corporation.
a) For connection using the RS-422/485 interface of the GOT or GT15-RS4-9S
The following shows connection cables that must be produced by the user.
Maximum cable length: confirm with the barcode reader manufacturer.
Barcode reader
Cable connection and signal direction
GOT
Signal name
Pin No.
Pin No.
Signal name
― ―
1 SDA
TX(+) 2 2 RDA
RX(+)
3
3 RSA
TX(-) 4 4 CSA
RX(-) 5 5 SG
― ― 6 SDB
SGND 7 7 RDB
― ― 8 RSB
― ― 9 CSB
b) For connection using GT15-RS4-TE
The following shows connection cables that must be produced by the user.
Maximum cable length: confirm with the barcode reader manufacturer.
Barcode reader
Cable connection and signal direction
GOT
Signal name
Pin No.
Pin No.
Signal name
― ―
1 SDA1
TX(+)
2
2 SDB1
RX(+)
3
3 RDA1
TX(-) 4 4 RDB1
RX(-) 5 5 SDA2
― ― 6 SDB2
SGND 7 7 RDA2
― ― 8 RDB2
― ― 9 SG
― ― 10 FG