TECHNICAL BULLETIN [Issue No.] GOT-A-0064-C [Page] 1/39 [Title] List of Valid Devices Applicable for GOT2000 Series [Date of Issue] Ver. C: February 2015 (First Edition: September 2013) [Relevant Models] GOT2000 Series Thank you for your continued support of Mitsubishi Graphic Operation Terminal (GOT). The peripheral devices listed in this bulletin have been concluded by Mitsubishi to be applicable for the GOT2000 series. For how to use each product, refer to the respective product’s manual.
TECHNICAL BULLETIN [Issue No.] GOT-A-0064-C [Page] 2/39 [Title] List of Valid Devices Applicable for GOT2000 Series [Date of Issue] Ver. C: February 2015 (First Edition: September 2013) [Relevant Models] GOT2000 Series Contents 1. Memory Card (CF card and SD card) ............................................................................................ 3 2. USB Memory .................................................................................................................................. 3 3.
TECHNICAL BULLETIN [Issue No.] GOT-A-0064-C [Page] 3/39 [Title] List of Valid Devices Applicable for GOT2000 Series [Date of Issue] Ver. C: February 2015 (First Edition: September 2013) [Relevant Models] GOT2000 Series 1. Memory Card (CF card and SD card) GOT Supported memory card GOT2000 GT27-MMR-Z CF card (MITSUBISHI GT05-MEM-□C) × ○ SD card (MITSUBISHI L1MEM-□GBSD) ○ × For the applicable non-Mitsubishi memory cards (CF cards and SD cards), refer to the following Technical Bulletins.
TECHNICAL BULLETIN [Issue No.] GOT-A-0064-C [Page] 4/39 [Title] List of Valid Devices Applicable for GOT2000 Series [Date of Issue] Ver. C: February 2015 (First Edition: September 2013) [Relevant Models] GOT2000 Series 3. Barcode Reader 3.1 Compatible Products 3.1.1 RS-232 connection ◎: Recommended product, ○: Operation validated, ×: Operation not checked Operation validation Refer to Manufacturer Model GOT2000 GT SoftGOT2000 BR-530RS-B1 ○ ○ AIMEX Corporation 3.2.
TECHNICAL BULLETIN [Issue No.] GOT-A-0064-C [Page] 5/39 [Title] List of Valid Devices Applicable for GOT2000 Series [Date of Issue] Ver. C: February 2015 (First Edition: September 2013) [Relevant Models] GOT2000 Series 3.2 System equipment of barcode readers The following shows the equipment to configure with different types of barcode readers. 3.2.
TECHNICAL BULLETIN [Issue No.] GOT-A-0064-C [Page] 6/39 [Title] List of Valid Devices Applicable for GOT2000 Series [Date of Issue] Ver. C: February 2015 (First Edition: September 2013) [Relevant Models] GOT2000 Series available. *4: The OP-27937(2m) manufactured by KEYENCE CORPORATION is available. *5: It is necessary to supply 24VDC to the barcode reader separately. For details, please refer to the manual of the barcode reader to be used.
TECHNICAL BULLETIN [Issue No.] GOT-A-0064-C [Page] 7/39 [Title] List of Valid Devices Applicable for GOT2000 Series [Date of Issue] Ver. C: February 2015 (First Edition: September 2013) [Relevant Models] GOT2000 Series 3) Cable connection diagram for a barcode reader manufactured by KEYENCE CORPORATION (BL-601, BL-U2) The following shows connection cables that must be produced by the user. Maximum cable length: confirm with the barcode reader manufacturer. Barcode reader Signal name Pin No.
TECHNICAL BULLETIN [Issue No.] GOT-A-0064-C [Page] 8/39 [Title] List of Valid Devices Applicable for GOT2000 Series [Date of Issue] Ver. C: February 2015 (First Edition: September 2013) [Relevant Models] GOT2000 Series 1) Cable connection diagram for a barcode reader manufactured by OMRON Corporation The following shows connection cables that must be produced by the user. Maximum cable length: confirm with the barcode reader manufacturer.
TECHNICAL BULLETIN [Issue No.] GOT-A-0064-C [Page] 9/39 [Title] List of Valid Devices Applicable for GOT2000 Series [Date of Issue] Ver. C: February 2015 (First Edition: September 2013) [Relevant Models] GOT2000 Series 3.2.4 System equipment (4) Manufacturer Barcode reader QD2130-□□ QD4130-□□ MG1100i-1D PD7130-YB-PTR UL310-0515 CAB-350 *1 HK-CP13-A05 SET8-0935 8-0736-80 *1 CAB-433 *1 OPTOELECTRONI CS CO.,LTD.
TECHNICAL BULLETIN [Issue No.] GOT-A-0064-C [Page] 10/39 [Title] List of Valid Devices Applicable for GOT2000 Series [Date of Issue] Ver. C: February 2015 (First Edition: September 2013) [Relevant Models] GOT2000 Series 3.2.
TECHNICAL BULLETIN [Issue No.] GOT-A-0064-C [Page] 11/39 [Title] List of Valid Devices Applicable for GOT2000 Series [Date of Issue] Ver. C: February 2015 (First Edition: September 2013) [Relevant Models] GOT2000 Series 3.2.6 System equipment (6) Manufacturer IDEC AUTO-ID SOLUTIONS Corporation Barcode reader DS2400N-□□□□ DS4800-1□00 Dedicated cable Included with a barcode reader Terminal box CBX100 Power supply unit RS-232 cable PS5R-B24 Produced by the user Refer to 1) below.
TECHNICAL BULLETIN [Issue No.] GOT-A-0064-C [Page] 12/39 [Title] List of Valid Devices Applicable for GOT2000 Series [Date of Issue] Ver. C: February 2015 (First Edition: September 2013) [Relevant Models] GOT2000 Series 3.2.7 System equipment (7) 2 1 Barcode reader 3 Manufacturer Barcode reader QD2130-□□ QD4130-□□ MG1100i-1D UL310-0515 CAB-350 *1 HK-CP13-A05 8-0736-80 *1 OPTOELECTRONI CS CO.,LTD.
TECHNICAL BULLETIN [Issue No.] GOT-A-0064-C [Page] 13/39 [Title] List of Valid Devices Applicable for GOT2000 Series [Date of Issue] Ver. C: February 2015 (First Edition: September 2013) [Relevant Models] GOT2000 Series 3.2.
TECHNICAL BULLETIN [Issue No.] GOT-A-0064-C [Page] 14/39 [Title] List of Valid Devices Applicable for GOT2000 Series [Date of Issue] Ver. C: February 2015 (First Edition: September 2013) [Relevant Models] GOT2000 Series 3.3 Compatible barcode types The following barcode reader communication settings are supported by the GOT. ○: Can be read in the GOT, △: Partly restricted, ×: Unreadable in GOT Barcode type Nippon Systems Development Co.,Ltd. Motorola Solutions, Inc. Honeywell International Inc.
TECHNICAL BULLETIN [Issue No.] GOT-A-0064-C [Page] 15/39 [Title] List of Valid Devices Applicable for GOT2000 Series [Date of Issue] Ver. C: February 2015 (First Edition: September 2013) [Relevant Models] GOT2000 Series 3.4 How to read data by a barcode reader Please refer to the followings for the data transfer format (header/terminator settings and others) that can be used in the GOT or the setting method to read data by a barcode reader.
TECHNICAL BULLETIN [Issue No.] GOT-A-0064-C [Page] 16/39 [Title] List of Valid Devices Applicable for GOT2000 Series [Date of Issue] Ver. C: February 2015 (First Edition: September 2013) [Relevant Models] GOT2000 Series 4. 2D Code Reader 4.1 Compatible Products ◎: Recommended product, ○: Operation validated, ×: Operation not checked Operation validation Reference Manufacturer Model GOT2000 GT SoftGOT2000 AIMEX Corporation IT4600SR-RS ○ ○ 4.2.1 MATRIX210-21□-□□□ ○ ○ MATRIX300-□□□-□□□ ○ ○ 4.2.
TECHNICAL BULLETIN [Issue No.] GOT-A-0064-C [Page] 17/39 [Title] List of Valid Devices Applicable for GOT2000 Series [Date of Issue] Ver. C: February 2015 (First Edition: September 2013) [Relevant Models] GOT2000 Series 4.2 System equipment of 2D code reader The following shows the equipment to configure with different types of 2D code readers. 4.2.1 System equipment (1) Manufacturer AIMEX Corporation OMRON Corporation OPTOELECTRON ICS CO.,LTD.
TECHNICAL BULLETIN [Issue No.] GOT-A-0064-C [Page] 18/39 [Title] List of Valid Devices Applicable for GOT2000 Series [Date of Issue] Ver. C: February 2015 (First Edition: September 2013) [Relevant Models] GOT2000 Series *4: This is a Mitsubishi Electric product. Please contact your local Mitsubishi Electric or representative for purchasing the cable. *5: To connect the 2D code reader to GT SoftGOT2000, connect the following USB/RS-232 conversion cables to a USB port on the personal computer.
TECHNICAL BULLETIN [Issue No.] GOT-A-0064-C [Page] 19/39 [Title] List of Valid Devices Applicable for GOT2000 Series [Date of Issue] Ver. C: February 2015 (First Edition: September 2013) [Relevant Models] GOT2000 Series 1) RS-232 cable connection diagram for a 2D code reader manufactured by OPTOELECTRONICS CO., LTD. The following shows connection cables that must be produced by the user. Maximum cable length: confirm with the 2D code reader manufacturer. 2D code reader Signal name Pin No.
TECHNICAL BULLETIN [Issue No.] GOT-A-0064-C [Page] 20/39 [Title] List of Valid Devices Applicable for GOT2000 Series [Date of Issue] Ver. C: February 2015 (First Edition: September 2013) [Relevant Models] GOT2000 Series 4) RS-232 cable connection diagram for a 2D code reader manufactured by MARS TOHKEN SOLUTION CO.LTD. The following shows connection cables that must be produced by the user. Maximum cable length: confirm with the 2D code reader manufacturer. 2D code reader Signal name Pin No.
TECHNICAL BULLETIN [Issue No.] GOT-A-0064-C [Page] 21/39 [Title] List of Valid Devices Applicable for GOT2000 Series [Date of Issue] Ver. C: February 2015 (First Edition: September 2013) [Relevant Models] GOT2000 Series 4.2.
TECHNICAL BULLETIN [Issue No.] GOT-A-0064-C [Page] 22/39 [Title] List of Valid Devices Applicable for GOT2000 Series [Date of Issue] Ver. C: February 2015 (First Edition: September 2013) [Relevant Models] GOT2000 Series 4.2.
TECHNICAL BULLETIN [Issue No.] GOT-A-0064-C [Page] 23/39 [Title] List of Valid Devices Applicable for GOT2000 Series [Date of Issue] Ver. C: February 2015 (First Edition: September 2013) [Relevant Models] GOT2000 Series 4.2.5 System equipment (5) 2D code reader Dedicated cable GOT Power supply unit Manufacturer KEYENCE CORPORATION 2D code reader TL-30 Dedicated cable Included with a 2D code reader Power supply unit TL-U1 4.2.6 System equipment (6) Manufacturer Cognex K.K.
TECHNICAL BULLETIN [Issue No.] GOT-A-0064-C [Page] 24/39 [Title] List of Valid Devices Applicable for GOT2000 Series [Date of Issue] Ver. C: February 2015 (First Edition: September 2013) [Relevant Models] GOT2000 Series 4.5 When using the GT21 model To connect the barcode reader with the built-in RS-232 port (on the back side) of GT2103-PMBDS or GT2103-PMBDS2, use the cable GT10-C02H-6PT9P. To use GT2104-R, refer to the following and fabricate a cable for connecting the GOT.
TECHNICAL BULLETIN [Issue No.] GOT-A-0064-C [Page] 25/39 [Title] List of Valid Devices Applicable for GOT2000 Series [Date of Issue] Ver. C: February 2015 (First Edition: September 2013) [Relevant Models] GOT2000 Series 5. Hubs for Ethernet Connection and Gateway Function (Compatible Product) Manufacturer Allied Telesis K.K. I-O DATA DEVICE, INC. KEYENCE CORPORATION PHOENIX CONTACT Mitsubishi Electric Corporation Mitsubishi Cable Industries,Ltd.
TECHNICAL BULLETIN [Issue No.] GOT-A-0064-C [Page] 26/39 [Title] List of Valid Devices Applicable for GOT2000 Series [Date of Issue] Ver. C: February 2015 (First Edition: September 2013) [Relevant Models] GOT2000 Series 6. Video Camera Precautions Some video cameras may require a separate power supply unit. Regarding a required power supply unit for a video camera, confirm with the manufacturer.
TECHNICAL BULLETIN [Issue No.] GOT-A-0064-C [Page] 27/39 [Title] List of Valid Devices Applicable for GOT2000 Series [Date of Issue] Ver. C: February 2015 (First Edition: September 2013) [Relevant Models] GOT2000 Series 9. RFID Controller 9.1 Compatible Products 9.1.1 RS-232 connection Manufacturer LS Industrial Systems Co., Ltd. OMRON Corporation MARS TOHKEN SOLUTION CO.LTD.. PONGEE INDUSTRIES CO.
TECHNICAL BULLETIN [Issue No.] GOT-A-0064-C [Page] 28/39 [Title] List of Valid Devices Applicable for GOT2000 Series [Date of Issue] Ver. C: February 2015 (First Edition: September 2013) [Relevant Models] GOT2000 Series (1) RS-232 cable connection diagram for an RFID controller manufactured by LS Industrial Systems Co., Ltd. The following shows connection cables that must be produced by the user. Maximum cable length: confirm with the RFID controller manufacturer. RFID controller Signal name Pin No.
TECHNICAL BULLETIN [Issue No.] GOT-A-0064-C [Page] 29/39 [Title] List of Valid Devices Applicable for GOT2000 Series [Date of Issue] Ver. C: February 2015 (First Edition: September 2013) [Relevant Models] GOT2000 Series (3) RS-232 cable connection diagram for a V620 RFID controller manufactured by OMRON Corporation The following shows connection cables that must be produced by the user. Maximum cable length: confirm with the RFID controller manufacturer. RFID controller Signal name Pin No.
TECHNICAL BULLETIN [Issue No.] GOT-A-0064-C [Page] 30/39 [Title] List of Valid Devices Applicable for GOT2000 Series [Date of Issue] Ver. C: February 2015 (First Edition: September 2013) [Relevant Models] GOT2000 Series (5) RS-232 cable connection diagram for an ICU-215 RFID controller manufactured by MARS TOHKEN SOLUTION CO.LTD. The following shows connection cables that must be produced by the user. Maximum cable length: confirm with the RFID controller manufacturer.
TECHNICAL BULLETIN [Issue No.] GOT-A-0064-C [Page] 31/39 [Title] List of Valid Devices Applicable for GOT2000 Series [Date of Issue] Ver. C: February 2015 (First Edition: September 2013) [Relevant Models] GOT2000 Series 9.2.2 When using the RS-422/485 connection The following shows the equipment to configure with different types of RFID controllers.
TECHNICAL BULLETIN [Issue No.] GOT-A-0064-C [Page] 32/39 [Title] List of Valid Devices Applicable for GOT2000 Series [Date of Issue] Ver. C: February 2015 (First Edition: September 2013) [Relevant Models] GOT2000 Series (a) For the RS-485 connection The following shows connection cables that must be produced by the user. Maximum cable length: confirm with the RFID controller manufacturer. RFID controller Signal name Pin No. RDA(-) 1 Cable connection and signal direction Pin No.
TECHNICAL BULLETIN [Issue No.] GOT-A-0064-C [Page] 33/39 [Title] List of Valid Devices Applicable for GOT2000 Series [Date of Issue] Ver. C: February 2015 (First Edition: September 2013) [Relevant Models] GOT2000 Series 9.3 How to read data by an RFID controller Please refer to the followings for the data transfer format (header/terminator settings and others) that can be used in the GOT or the setting method to read data by an RFID controller.
TECHNICAL BULLETIN [Issue No.] GOT-A-0064-C [Page] 34/39 [Title] List of Valid Devices Applicable for GOT2000 Series [Date of Issue] Ver. C: February 2015 (First Edition: September 2013) [Relevant Models] GOT2000 Series 10. USB Mouse Function Item Specification USB mouse Two-button USB mouse which is compliant with USB2.0 *1*2*3 *1: A wheeled mouse and a mouse with more than three buttons can be used as a two-button mouse.
TECHNICAL BULLETIN [Issue No.] GOT-A-0064-C [Page] 35/39 [Title] List of Valid Devices Applicable for GOT2000 Series [Date of Issue] Ver. C: February 2015 (First Edition: September 2013) [Relevant Models] GOT2000 Series 11.4 Other device When connected by USB, the following device can send key codes to input objects (such as text input or numerical input) by using the USB keyboard function.
TECHNICAL BULLETIN [Issue No.] GOT-A-0064-C [Page] 36/39 [Title] List of Valid Devices Applicable for GOT2000 Series [Date of Issue] Ver. C: February 2015 (First Edition: September 2013) [Relevant Models] GOT2000 Series 14. Printer PictBridge compatible printers and serial printers are available for the GOT2000 series. The following shows the correspondence of the GOTs, printers and software.
TECHNICAL BULLETIN [Issue No.] GOT-A-0064-C [Page] 37/39 [Title] List of Valid Devices Applicable for GOT2000 Series [Date of Issue] Ver. C: February 2015 (First Edition: September 2013) [Relevant Models] GOT2000 Series (3) Paper jam For the paper jam, remove the paper, and then execute the printing process again by using the GOT. When the printing process does not start after the above actions, execute any of the following methods.
TECHNICAL BULLETIN [Issue No.] GOT-A-0064-C [Page] 38/39 [Title] List of Valid Devices Applicable for GOT2000 Series [Date of Issue] Ver. C: February 2015 (First Edition: September 2013) [Relevant Models] GOT2000 Series (1) Cable connection diagram and precautions for a printer manufactured by NADA ELECTRONICS, LTD. (a) Connection cable diagram The following shows connection cables that must be produced by the user. (Maximum cable length: confirm with a printer manufacturer.) Printer Signal name Pin No.
TECHNICAL BULLETIN [Issue No.] GOT-A-0064-C [Page] 39/39 [Title] List of Valid Devices Applicable for GOT2000 Series [Date of Issue] Ver. C: February 2015 (First Edition: September 2013) [Relevant Models] GOT2000 Series Version * Print date September 2013 A January 2014 B C December 2014 February 2015 Revision - First edition (Japanese only) (Print date indicates the date that the Japanese version was issued.) - Models have been added to "3. Barcode Reader". - "13.