Communication Unit User's Manual CU-7011
Table Of Contents
- Preface
- How this book is organized
- SAFETY PRECAUTIONS
- Content Overviews
- Chapter 1 Ethernet System Configuration
- Chapter 2 Functions of the CU-7011
- Chapter 3 Components and Functions
- Chapter 4 CU Status Indication by LED Indicators
- Chapter 5 Applying Power to the CU-7011
- Chapter 6 Connecting to Ethernet
- Chapter 7 Charging the Rechargeable Battery Cartridge
- Chapter 8 Displaying the CU System Information on the BHT
- Chapter 9 Updating the CU System Program via the BHT
- Chapter 10 Remote Wakeup
- Appendix Specifications
6
6.2 Interface Cable Connection
Connect the modular plug* of the Ethernet cable to the Ethernet port of the CU-7011.
(*10Base-T 8-pin modular, RJ45, ITA/ETA category 3 or higher)
Lock lever
Ethernet cable
•When connecting the modular plug, insert it until it snaps into place. To
disconnect it, press the lock lever and pull it out.
• Do not force the modular plug in or out. Doing so will result in a CU-7011
failure.