User`s manual

117
Barcode Handy Terminal
 Wireless Security Settings
1. Select “2: SECURITY” at the SET RF PARAMETER menu and then
press the ENT key.
The screen displays as shown on the right.
[1:SECURI Y MODE]: Sets the wireless secuT rity mode.
:CONFIGURATION]: Sets the wireless security parameters.
or details of the above items.
Press the C key to return to the SET RF PARAMETER screen.
ireless Security Mode Settings
1.
key.
.
t mode
: WPA2-PSK]: WPA2-PSK mode
To change the settings, use the cursor keys ([▲] [▼]) or numerical keys ([1] [2] [3] [4] [5] [6]) to
3. the SET SECURITY menu.
[2
Refer to the follow
ing section f
 W
Select “1: SECURITY MODE” at the SET SECURITY menu and
then press the ENT
The screen displays as shown on the right.
The highlighted setting is the current setting
[1: None]:
None mode
[2: 1x Supplicant]: 1x Supplican
[3: WPA-1x]: WPA 1x mode
[4: WPA-PSK]: WPA-PSK mode
[5: WPA2-1x]: WPA2-1x mode
[6
2.
highlight each setting value.
Press the
ENT key or C key to return to