User`s manual

56
Preparation for the communications test
(1) Jump back the optical interface port on the CU-5000
Arrange the Dsub-25P connector as illustrated below and connect it to the RS-232C
interface port on the CU-5000.
Pin No.
2
3
SD
CS
RS
RD
4
5
Pin No.
5
2
7
6
3
SD
SG
DR
CS
RD
+V
(+5V to +15V DC, 100 mA max.)
-V
(-5V to -15V DC, 100 mA max.)
GND
For CU-5001 For CU-5002
(2) Jump back the direct-connect interface port on the BHT-5000
Arrange the 3-pole mini stereo plug as illustrated below and connect it to the direct-
connect interface port on the BHT-5000.
SD
RD
SD RD