User`s manual

Chapter 2. Getting Started the BHT-5000 and System Mode

[5.2] Memory test

TEST MEMORY

Testing

XXXXX/YYYYY

Selecting "2: MEMORY" on the TEST menu calls

up the screen shown at left and starts writing and

reading onto/from all areas of the RAM.

xxxxx: Tested RAM capacity (unit: kilobytes)

yyyyy: Total RAM capacity (unit: kilobytes)

TEST MEMORY

Test OK

YYYYY/YYYYY

Upon normal completion of the RAM test, the BHT-

5000 beeps, shows the message as shown at left,

and returns to the TEST menu.

TEST MEMORY

Test NG

XXXXX/YYYYY

Address:hhmmll

Write :AA

Read :BB

If any error is detected, the BHT-5000 beeps, shows

the message as shown at left, and terminates the

test.

Where,

hhmmll: Address where an error has occurred.

AA: Data to write.

BB: Data read out from the RAM.

To return to the TEST menu, press C key.