User`s manual

[4.7] Setting others (resume function and BHT-2000 compatible

mode)

OTHERS

1:RESUME: ON OFF

2:BHT-2000: ON OFF

Selecting "7: Others" on the SET SYSTEM menu

calls up the screen shown at left.

Reversed is the current setting.

1 Resume : Activates or deactivates the resume

function which resumes whatever

display was shown before the

power was turned off, when the

BHT-5000 is powered up.

2 BHT-2000 : Turns the BHT-2000 compatible

mode on or off.

Select a desired item by using the numerical keys

* and

* keys, and then select a desired

setting by using

* and

* keys.

To return to the SET SYSTEM menu, press C key.

BHT-2000 compatible mode

This compatible mode allows user programs writ-

ten for the BHT-2000 to run on the BHT-5000.

When those user programs are running, they use

only the middle section of the LCD for displaying.

(The BHT-5000 is larger than the BHT-2000 in the

numbers of columns and lines.)

When the BHT-5000 is placed in the BHT-2000 compatible mode, it cannot run

user programs written for the BHT-5000.

Even in this mode, some functions such as the frequencies of the beeper are not

compatible. For details, refer to the "BHT-BASIC 3.0 Programmer's Manual."

Some user programs written for the BHT-2000 may not work correctly in this

mode.

NOTE

* For BHT-5000s having a 26-key pad, use F5 , F6 , F7 and F8 keys instead of

, and

keys, respectively