User`s manual

47
Chapter 2. Getting Started the BHT-5000 and System Mode
Selecting "6: Key" on the SET SYSTEM menu calls
up the screen shown at left.
Reversed is the current setting.
1 Shift lock : Switches the function of SF key.
Nonlock: The keypad will be
shifted only when SF key is held
down.
Onetime: Once SF key is pressed,
the next one key pressed will be
shifted and the following keys will
not be shifted.
2 M1 : Defines magic key M1 as listed
below.
3 M2 : Defines magic key M2 as listed
below.
No The key entry will be
ignored.
ENT Acts as ENT key.
Trig. Acts as the trigger
switch.
SFT Acts as SF key.
BL Acts as the backlight
function on/off key.
Select a desired item by using the numerical keys
or
* and
* keys, and then select a desired
setting by using
* and
* keys.
To return to the SET SYSTEM menu, press C key.
[4.6] Defining the functions of the shift key and magic keys
SET KEY
1:Shift lock
Nonlock Onetime
2:M1
No ENT Trig. SFT BL
3:M2
No ENT Trig. SFT BL
Magic keys M1 and M2
You can make M1 and M2 keys act as ENT key, trigger switch, SF key, or backlight
function on/off key.
If you define M1 key as the backlight function on/off key, pressing M1 key activates
or deactivates the backlight function.
In user programs, a string data also can be assigned to these magic keys.
If both M1 and M2 keys are defined as the backlight function on/off key, M2
key will act as the backlight function on/off key; M1 key will be ignored.
NOTE
* For BHT-5000s having a 26-key pad, use F5 , F6 , F7 and F8 keys instead of
,
,
, and
keys, respectively