User`s manual

46
Setting the interface port
Selecting "3: Default" on the SET COMMUNICA-
TION menu calls up the screen shown at left.
Reversed is the current setting.
1 BASIC : Selects the optical or direct-
connect interface port to be
used
for user programs writ-
ten in BHT-BASIC 3.0
("COM:" or XFILE statement)
.
2 SYSTEM MODE : Selects the optical or direct-
connect interface port to be
used
for downloading or
uploading files in System
Mode
.
Select a desired item by using the numerical keys
or
* and
* keys, and then select a desired
setting by using
* and
* keys.
To return to the SET COMMUNICATION menu,
press C key.
SET COM DEFAULT
1:BASIC
Optical Connector
2:SYSTEM MODE
Optical Connector
* For BHT-5000s having a 26-key pad, use F5 , F6 , F7 and F8 keys instead of
,
,
, and
keys, respectively