User`s manual

24
[ 3 ] Deleting the JIS Font Files
The JIS Level 1 and Level 2 font files, which are resident in the system area of the flash
ROM, contain font data for displaying Kanji characters on the LCD. If you do not need
to display Kanji characters, you can delete those JIS font files according to the steps
below. After the deletion, the memory area which was occupied by those files can be
used as a user area.
SYSTEM MENU
1:Execute Program
2:Download
3:Upload
4:Set System
5:Test
6:Version
JIS 1/JIS 2
1:DELETE
2:DOWNLOAD
3:UPLOAD
DELETE
1:JIS 1
2:JIS 2
DELETE
JIS 1 DELETE
OK ?
1:YES 2:NO
DELETE
JIS 1 DELETE
** Completed **
(1) While holding down SF and 1 keys, press
PW key to start up System Mode.
The SYSTEM MENU screen shown at left will
appear.
(2) Press 2 key while holding down SF key.
The JIS 1/JIS 2 menu shown at left will ap-
pear.
(To return to the previous screen, press C
key.)
(3) If the "1: DELETE" is not selected, press 1
key. Then, press ENT key.
The screen shown at left will appear.
(To return to the previous screen, press C
key.)
(4) Press 1 key to delete the JIS Level 1 font file.
(To delete the JIS Level 2 font file, press 2
key.)
The confirmation screen will appear.
(5) Press 1 key and then press ENT key.
The selected font file (the JIS Level 1 font file
in this example) will be deleted and the screen
shown at left will appear.