User`s manual

Chapter 2. Getting Started the BHT-5000 and System Mode

(3) Selecting the English or Japanese message version

Preceding the execution of initialization, the mes-

sage version selection screen will appear as shown

at left.

1 JAPANESE : Switches the message version to

Japanese.

2 ENGLISH : Switches the message version to

English.

Select a desired item by using the numerical keys,

then press ENT key. The BHT-5000 starts initiali-

zation.

SELECT MESSAGE

1:JAPANESE

2:ENGLISH

SYSTEM INITIALIZE

** Completed **

Upon completion of the initialization, the BHT-5000

displays the screen shown at left and turns itself

off automatically.

(4) Completion of initialization

Do not power off the BHT-5000 until the above initialization completion screen

appears. A too-early powering-off will interrupt initialization, requiring you to

initialize the BHT-5000 again.

If the message "System error! Contact your administrator. Note the error drive.

(DRIVE X)" appears as shown on page 19 although the initialization has com-

pleted, initialize the BHT-5000 again.

If you initialize the BHT-5000 after downloading user programs and data, all of

those programs and data stored in the target memory area will be lost. Download

them again if necessary.

Initialization will restore the LCD contrast level (refer to Subsection 2.3.3), com-

munications conditions and other settings to the default values, so modify them if

necessary. After initialization, be sure to set the calendar clock (refer to [ 2 ]).

NOTE