User`s manual

(1) Selecting the memory area to be initialized

SYSTEM INITIALIZE ?

1:ALL

2:DRIVE A

3:DRIVE B

Press PW key while holding down SF key, trigger

switch and 0 key together.

The screen shown at left will appear.

1 ALL : Initializes both the flash ROM (ex-

cept for its system area) and RAM.

This should be chosen when you

first power on the BHT-5000 from

the time of purchase.

2 DRIVE A : Initializes the RAM only.

3 DRIVE B : Initializes the flash ROM only (ex-

cept for its system area).

Select a desired item by using the numerical keys,

then press ENT key.

If the message "System error! Contact

your administrator. Note the error drive.

(DRIVE A)" appears on the LCD, select

"2: DRIVE A" to initialize the RAM.

If the message "System error! .....

(DRIVE B)" appears, select "3: DRIVE

B" to initialize the flash ROM.

REFERENCE

(2) Confirming the memory area selected for initialization

Selecting the memory area in step (1) above will

call up the confirmation screen shown at left where

you check the selected memory area on the 3rd

line.

1 Yes : Shifts to the message version selection

screen before executing initialization.

2 No : Cancels initialization and turns the power

off.

Select a desired item by using the numerical keys,

then press ENT key.

SYSTEM INITIALIZE ?

(ALL)

1:Yes 2:No