User`s manual

115
Chapter 5. Handling the CU-5000
DATA
CHG1
CHG2
POWER
DATA
CHGI
CHG2
POWER
DATA
CHG1
CHG2
POWER
DATA
CHG1
CHG2
POWER
⇒⇒⇒
⇒⇒⇒
Operator’s
Action
Load a battery
cartridge into
the CU-5001.
Power on
the CU-5001.
(After approx.
10 hours)
Take out the
battery
cartridge.
LED
Indication
ON
ON
ON
OFF
ON
CU-5001
Status
Powered OFF
Ordinary
charging
Trickle
charging
On standby
[ 2 ] Charging Only
(1) Load a Ni-MH battery cartridge into the CU-5001 from the battery cartridge slot.
(2) Power on the CU-5001.
The CU-5001 turns on the CHG2 LED and starts charging the cartridge.
After approx. ten hours of charging, the CHG2 LED starts flashing at 2-second
intervals, indicating that the charging is completed.
(3) Press the battery ejection button to take out the battery cartridge.
■ Charging Operation and LED Indication
Flashing at
2-second
intervals