User`s manual

106
5.1 Functions of the CU-5000
The optical communications unit CU-5000 is available in two models: CU-5001 and CU-
5002. The CU-5001 has both of functions (1) and (2) given below; the CU-5002 has only
function (1).
(1) Data exchange function
The CU-5001/CU-5002 exchanges data and programs between the BHT-5000 and
the host computer. It interfaces with the BHT-5000 via the optical interface and
with the host computer via the RS-232C interface.
(2) Ni-MH battery cartridge charging function
The CU-5001 charges the Ni-MH battery cartridge.
5.2 Components and Functions
• Optical interface port
Used to exchange data optically
with the BHT-5000.
• Status indicator
(Not provided on
CU-5002)
• Power switch
(Not provided on CU-5002)
• BHT-5000 detection switch
Placing the BHT-5000 on the
CU pushes down this switch,
allowing charging or data
transmission.
• BHT-5000 charge terminals
(Not provided on CU-5002)
Do not stain these terminals; doing so could
result in a lower charging efficiency.
• Power inlet connector
(Not provided on CU-5002)
Plug the AC adapter into this
connector.
• RS-232C interface port
Used to exchange data
with the host computer.