User`s manual

4.1 System Errors

If some error occurs when the power is turned on or during program execution, one of

the following error messages will appear on the LCD.

System Program error

■ Problem

System Program error occurs.

■ Solution

Contact your nearest dealer.

*******************

** No System **

*******************

Low battery indication

■ Problem

When the power is turned on or an application

program is initiated, the battery voltage level has

lowered.

If the battery output voltage level lowers dur-

ing program execution, the BHT-5000 beeps

five times (for 0.1 second per beep).

■ Solution

If the BHT-5000 is loaded with the Ni-MH battery

cartridge, immediately turn off the power and then

replace or charge the battery cartridge. (For the

charging procedure, refer to Chapter 5, Section

5.5.)

If the BHT-5000 is loaded with the dry battery car-

tridge, immediately turn off the power and replace

the batteries.

NOTE

(When the Ni-MH battery cartridge

is loaded)

Charge the battery !

(When the dry battery cartridge

is loaded)

Replace the batteries