Specifications

Chapter 2 Getting Started the BHT and System Mode

[ 4 ] System Environment Setting

On the SYSTEM MENU, selecting "4: SET SYSTEM" calls up the

screen shown at left.

[1] EXECUTE PROGRAM: Sets an auto-start execution program to

be run when the power is turned on.

[2] DISPLAY: Sets the message version (English o

Japanese).

[3] DATE/TIME: Sets the calendar clock (date and time).

[4] BARCODE: Sets the special barcode scanning

parameters (the black-and-white

inverted label reading and the decoding

level) and the minimum number of digits

to be read for bar codes (ITF, STF and

Codabar).

[5] COMMUNICATION: Sets the communications environments

(interface port and communications

parameters).

[6] KEY: Defines the functions of the shift key

and magic keys.

[7] RESUME: Sets the resume function.

[8] DEFRAG: Defragments the drive.

[9] TCP/IP: Sets the TCP/IP, FTP and DHCP (in

LAN-support software only).

Select a desired item by using the numerical keys or F5 and F6 keys,

and the selected item becomes highlighted. Then press the ENT key.

Press the C key to return to the SYSTEM MENU.