Specifications

Chapter 2 Getting Started the BHT and System Mode
(5) Completion of initialization
Upon completion of the initialization, the BHT displays the screen
shown at left for a second and turns itself off automatically.
• Do not turn the BHT off until the above initialization completion screen appears. A too-earl
y
turning-off will interrupt initialization, requiring you to initialize the BHT again.
• If the message "Contact your administrator. Note the error number. (2XXX)" appears although the
initialization has been finished, you need to initialize the BHT again.
• If you initialize the BHT after downloading user programs and data, all of those programs and data
stored in the target memory area will be lost. Download them again if necessary.
• Initialization will restore the LCD contrast level (refer to Section 2.3.3), communications
conditions and other settings to the default values, so modify them again if necessary. Afte
r
initialization, be sure to set the calendar clock (refer to Section 2.3.2).
35