Specifications

Chapter 2 Getting Started the BHT and System Mode
DIR/FILE entry box: The FTP client will interpret a character string entered into this box as a directory
name at first, so it will send a Change Directory request to the FTP server. If the specified directory
exists in the FTP server, the server will change a directory from the default to that specified one; if not,
the FTP client will interpret the entered character string as a file name and send a Download request to
the server.
FIELDS entry box:
Only when downloading a data file, you need to enter field information into this box.
Before starting downloading, enter field information by using numerical keys and period (.) key. Pressing
the period (.) key will enter a comma (,). For downloading of program files, nothing is required to enter.
[7.2] Uploading by FTP
M1 key ⇑ ⇓ M2 key
On the FTP MENU, selecting "2: UPLOAD" calls up the screen shown
at left if a file(s) exists. The current settings are displayed.
Entry box for a directory and/or file name
File name currently selected (Nothing is displayed at the initial state of the
FTP client.)
Status message
IP address of an FTP server you have specified
Current directory reserved
[1] DIR/FILE: Specifies a directory and/or file name. (Fo
r
details, refer to the next page.)
[2] SELECT FILE: Selects a file to be uploaded. (For details, refe
r
to the next page.)
Select a desired item by using the numerical keys or F5 and F6 keys,
and then press the ENT key.
If you select "1: DIR/FILE,"
its entry box becomes ready to accept
entry and shows a cursor.
Enter the desired value by using the numerical keys and period (.)
key, and then press the ENT key.
Pressing the SF key switches the entry mode between the numeric
mode (without a guidance) and alphabet mode.
In the entry mode, to delete a single character, press the BS key. To
delete the whole entry you made, press the C key.
To return to the FTP MENU, press the C key when any item is
highlighted.
93