User`s manual

26
BHT-805BWB
3.1 Scanning Barcodes
Follow the procedure below to scan barcodes.
1. Turn the BHT power ON.
2. Press the trigger switch.
The BHT emits an illumination LED.
− Point − The trigger switch is assigned to magic
keys M3 and M4 when shipped from the
factory.
3. Hold the BHT close to the barcode to align the
illumination LED.
When the BHT has read the barcode successfully, the
indicator LED will illuminate in blue.
− Point − The barcode scanning method may diffe
r
depending on the application. Perform
scanning in accordance with the
instructions provided in the application
User’s Manual.
− Note − z If required, clean dirty labels before scanning.
z It may not be possible to perform scanning in direct sunlight.
z If the barcode is on a curved surface, perform scanning in the center of the illumination LED
emission range.
z If the barcode reading window is pulled away from the barcode, the scannable barcode range will
become narrower than that of the illumination LED emission.
Power key
Illumination LED