User's Manual
Table Of Contents
- US and Canada Regulations
- Declaration of Conformity(For European Union)
- Preface
- How this book is organized
- SAFETY PRECAUTIONS
- Chapter 1 Quick Guide
- Chapter 2 Getting Started the BHT and System Menu
- Chapter 3 Communications Operations of the BHT-202B-CE/202BW-CE
- Chapter 4 Error Messages
- Chapter 5 Handling the CU-200(Option)
- Appendices
98
Testing the IrDA interface port
Selecting the "1:OPTICAL" on the COM menu calls up the screen
shown at left.
At the slave BHT to be tested, select the "1:SLAVE" and at the maste
r
BHT, select the "2:MASTER."
Then press the ENT key on each BHT.
During the test, the screen shown at left is displayed.
XXXXX: Transmission speed (2400, 9600, or 115200 bps)
YYY: Hex data being sent (0 to 256)
Upon normal completion of the test, the tested slave BHT beeps once
and displays the screen shown at left.
The master BHT automatically returns to the COM menu.