User's Manual
Table Of Contents
- US and Canada Regulations
- Declaration of Conformity(For European Union)
- Preface
- How this book is organized
- SAFETY PRECAUTIONS
- Chapter 1 Quick Guide
- Chapter 2 Getting Started the BHT and System Menu
- Chapter 3 Communications Operations of the BHT-202B-CE/202BW-CE
- Chapter 4 Error Messages
- Chapter 5 Handling the CU-200(Option)
- Appendices
88
Setting the ESSID
Tapping the ID tab on the NIC Control menu displays the screen
shown at left.
You can specify an ESSID (Extended Service Set ID) to be used on
the communications network. For details about the ESSID, refer to
Chapter 3, Section 3.1.2, "RF-Related Parameters."
Setting the RF options
Tapping the Option tab on the NIC Control menu displays the screen
shown at left.
You can set the following:
Power: Select the power mode for the wireless module.
Zero config: Select the Zero config mode.
For details about the parameters above, refer to Chapter 3, Section
3.1.2 "RF-Related Parameters."