User`s manual

ManualsBrandsDenso ManualsComputer equipmentAT27Q-SB

100

Code 128, GS1-128 (EAN-128)

Items Parameters Defaults Refer to:

Enable 

Reading Code 128

Disable

Enable 

Reading GS1-128 (EAN-128)

Disable

Section 12.2

(See Note 2.)

Minimum number of readable digits

for Code 128

1 digit

Maximum number of readable digits

for Code 128

1 to 99 digits

(excluding start/stop codes and

1-digit check digit)

99 digits

(See Note 1.)

Disable

Transmit GS 

Transmission of FNC1 for Code 128

User-defined

Section 12.2

Minimum number of readable digits

for GS1-128 (EAN-128)

1 digit

Maximum number of readable digits

for GS1-128 (EAN-128)

1 to 99 digits

(excluding start/stop codes and

1-digit check digit)

99 digits

(See Note 1.)

Disable

Transmit GS 

Transmission of FNC1 for GS1-128

(EAN-128)

User-defined

Section 12.2

(Note 1) The setting ranges are different from the numbers of digits that the scanner can actually read.

(Note 2) Using the QR-coded parameter menu enables or disables scanning of both Code 128 and GS1-128 (EAN-128) at

the same time.

Code 93

Items Parameters Defaults Refer to:

Enable

Reading Code 93

Disable 

Section 12.2

Minimum number of readable digits

for Code 93

1 digit

Maximum number of readable digits

for Code 93

1 to 99 digits

(excluding start/stop codes and 2-digit

check digits)

99 digits

(See Note 1.)

(Note 1) The setting ranges are different from the numbers of digits that the scanner can actually read.

: Can be changed only with the configuration software.