User`s manual

83
Codabar (NW-7)
Items Parameters Defaults Refer to:
Enable, without a check digit 
Enable, with a check digit
(Check digit transmission enabled)
Enable, with a check digit
(Check digit transmission disabled)
Reading Codabar (NW-7)
Disable
Section 12.2
Minimum number of readable digits
for Codabar (NW-7)
4 digits
Maximum number of readable digits
for Codabar (NW-7)
3 to 99 digits
(including start/stop codes)
99 digits
(See Note 1.)
Transmit a/b/c/d

Transmit A/B/C/D
Transmission of Start/Stop codes
for Codabar (NW-7)
Disable
Section 12.2
MOD-16

Check digit method for Codabar (NW-7)
7-check method
Section 12.2
(Note 1) The parameter setting ranges are different from the numbers of digits that the scanner can actually read.
Code 39
Item Parameters Defaults Refer to:
Enable, without a check digit 
Enable, with a check digit
(Check digit transmission enabled)
Enable, with a check digit
(Check digit transmission disabled)
Reading Code 39
Disable
Section 12.2
Minimum number of readable digits
for Code 39
1 digit
Maximum number of readable digits
for Code 39
1 to 99 digits
(excluding start/stop codes)
99 digits
(See Note 1.)
Enable
Transmission of Start/Stop codes
for Code 39
Disable 
Section 12.2
Enable
Conversion to FULL ASCII
Disable 
Section 12.2
(Note 1) The parameter setting ranges are different from the numbers of digits that the scanner can actually read.
: Can be changed only with the configuration software.