User`s manual

82
Items Parameters Defaults Refer to:
Enable 
Reading EAN-8
Disable
Sections 9.4 and
12.2
Enable 
EAN-8 transmission of check digit
Disable
Enable
EAN-8 Conversion to the EAN-13 format
Disable 
Enable
Reading UPC/EAN with 2-digit add-on
Disable 
Enable
Reading UPC/EAN with 5-digit add-on
Disable 
Enable
Reading UPC/EAN with add-on only
Disable 
Disabled checking 
Add-on check level
Levels 1 to 4
Sections 9.4 and
12.2
Interleaved 2of5
Items Parameters Defaults Refer to:
Enable, without a check digit 
Enable, with a check digit
(Check digit transmission enabled)
Enable, with a check digit
(Check digit transmission disabled)
Reading Interleaved 2of5
Disable
Section 12.2
Minimum number of readable digits
for Interleaved 2of5
4 digits
Maximum number of readable digits
for Interleaved 2of5
2 to 99 digits
99 digits
(See Note 1.)
(Note 1) The parameter setting ranges are different from the numbers of digits that the scanner can actually read.
Standard 2of5
Items Parameters Defaults Refer to:
Enable, without a check digit
Enable, with a check digit
Reading Standard 2of5
Disable 
Enable 
Standard 2of5 transmission of check digit
Disable
Section 12.2
Minimum number of readable digits
for Standard 2of5
3 digits
Maximum number of readable digits
for Standard 2of5
3 to 99 digits
99 digits
(See Note 1.)
(Note 1) The parameter setting ranges are different from the numbers of digits that the scanner can actually read.
: Can be changed only with the configuration software.