User`s manual

78
(8) Data transmission format common to all interfaces
Items Parameters Defaults Refer to:
Enable
Transmission of code ID mark
Disable 
Section 8.3
Before prefix
Code ID mark position
After prefix 
Section 8.3
Type 1 (DENSO1) 
Type 2 (DENSO2)
Type 3
Type 4
Code ID mark
User-defined
Section 8.3, (5)
Coupling 
Code ID mark output mode
Separating
Section 8.3, (5)
Enable, in 4 digits
Enable, in 2 digits
Transmission of the number of digits
(not applicable to UPC/EAN codes)
Disable 
Section 8.3, (6)
Enable
Prefix transmission
Disable 
Enable
Suffix transmission
Disable 
Section 8.3, (2)
Enable
Scanner ID output
Disable 
Section 8.3, (4)
Enable
GTIN format conversion
Disable 
Conversion to 16 digits 
Conversion to 14 digits
Conversion type from UPC/EAN/
Interleaved 2of5 (14-digit) to GTIN format
Conversion prohibited
Conversion to 14 digits 
Conversion to 13 digits
Conversion type from GS1 DataBar
(RSS)/GS1-128 (EAN-128) in GTIN
format to EAN format
Conversion prohibited
Prefix PI in conversion from UPC/EAN/
Interleaved 2of5 (14-digit) to GTIN format
0 to 9 0
Section 8.4
(Note 1) No BCC will be transferred if no header is prefixed.
: Can be changed only with the configuration software.
.