User`s manual

72
Chapter 11 Parameters and Defaults
The tables below list the parameters and their defaults. Those parameters can be changed with the QR-coded
parameter menu or configuration software (ScannerSetting_2D), except shadowed ones only with the configuration
software.
When the scanner leaves the factory, all of these parameters are set to defaults.
(1) Reading modes
Items Parameters Defaults Refer to:
Scan w/ Bluetooth

link broken
Scanning with Bluetooth

wireless link
broken
Cancel "Scan w/ Bluetooth

link
broken"

Section 3.2
Regular read mode 
Data verification mode
(n-point verification)
Scanning modes
Data verification mode
(2-point verification)
Section 6.1
No editing 
Data extraction mode
Data substitution mode
Data blocksorting mode
Data editing
ADF script mode
Section 6.2
Enable
Point scan mode
Disable 
Section 6.3
Double-read enabled
Period of double-read prevention
Period of double-read prevention
0.1 to 9.9 seconds
1s
Section 3
(2) Communications modes
Items Parameters Defaults Refer to:
BA10/11 
Windows PC/Android
Connection target of scanner
iOS (iPhone/iPad)
Section 2.2
SPP 
Profile
HID
Windows PC
(SPP,HID Profile with PINCODE)
Windows PC
(SPP,HID Profile without
PINCODE)
Android (SPP Profile)
Android (HID Profile)
Easy connection setup (See Note 1.)
iOS (iPhone/iPad)
Section 2.2
(Note 1): Can be changed only with the QR-coded parameter menu.
: Can be changed only with the configuration software.