User`s manual

GS1 DataBar (RSS)

Code data read will be transmitted as is.

FNC1 of GS1 DataBar Expanded (RSS Expanded) will be converted to GS(1Dh) and can be selectable from either

transferred or user selection.

The conversion to the GTIN format is also selectable. For the GTIN format conversion, refer to Section 9.5.

GS1 DataBar (RSS) Composite symbols

Code data read will be transmitted as is.

Under the conditions “Code ID mark: Type 1” and “Code ID mark output mode: Separating,” a separator (GS: 1Dh)

and 2D code ID mark are inserted between the linear component and 2D Composite component. (For details about the

code ID mark, refer to (5) Code ID mark)

Under the conditions “Code ID mark: Type 4” and “Linear component length (RSS/EAN-128): Variable,” a separator

(GS: 1Dh) is inserted between the linear component and 2D Composite component.

UPC/EAN Composite symbols

Code data read will be transmitted as is.

You can select whether or not to transmit a check digit of the linear component (UPC/EAN).

Under the conditions “Code ID mark: Type 1” and “Code ID mark output mode: Separating,” a separator (GS: 1Dh)

and 2D code ID mark are inserted between the linear component and 2D Composite component.

Under the conditions “Code ID mark: Type 2,” the 2D code ID mark is inserted between the linear component and 2D

Composite component. (For details about the code ID mark, refer to (5) Code ID mark)