User`s manual

6.2.3 Data blocksorting mode

The scanner splits code data read into a maximum of 5 blocks at the specified split positions, sorts those blocks in the

specified order, and outputs it in the data transmission format selected in the scanner (see Chapter 8, Section 8.2).

Note: The split position must be specified by the number of digits from the head of code data read. Specifying the

number of digits exceeding that in the code data results in an error.

 Blocksorting conditions

Blocksorting conditions Choices

Any code

QR Code

iQR Code

PDF417

Data Matrix

MaxiCode

Aztec

UPC-A/EAN-13

UPC-E

EAN-8

Code 128

GS1-128 (EAN-128)

Codabar (NW-7)

Code 39

Code 93

Interleaved 2of5 (ITF)

Standard 2of5 (STF)

GS1 DataBar (RSS)

“Code type”

EAN.UCC Composite symbology

Example

Code read: Code 128, Data: 1234567890,

Header: STX, Terminator: ETX, Scanner ID: Disable, Code ID mark: Disable,

Transmission of the number of digits: 4 digits, Prefix/Suffix: None, BCC: Disable

Split position Order of blocks Output data

3rd position, 8th position Block 2, 1, 3 [STX]K00104567812390[ETX]

3rd position, 8th position Block 1, 3 [STX]K000512390[ETX]