User`s manual

18
 Extraction start and end positions
"Extraction start position" "Extraction end position"
Head position
Tail position
nth position
Tail position
By n positions from the start position
nth position
nth position
The n can be 1 through 9999. Note that if the extraction start position is specified as nth position, the extraction end
position should be equal to or greater than the extraction start position.
Note: The number of characters for Code 39 and NW-7 symbols should be specified including start and stop codes.
Example
Code read: QR Code, Data: 12345,
Header: STX, Terminator: ETX, Scanner ID: Disable, Code ID mark: Type 1,
Transmission of the number of digits: Enable, Prefix/Suffix: None, BCC: Disable
Extraction conditions Extraction start position Extraction end position Output data
Head position 3rd position [STX]Q0003123[ETX]
Tail position 3rd position [STX]Q0003345[ETX]
1st position Tail position [STX]Q000512345[ETX]
1st position By 3 positions [STX]Q0003123[ETX]
2nd position 4th position [STX]Q0003234[ETX]
Head position 6th position Error
Tail position 6th position Error
6th position Tail position Error
6th position By 10 positions Error
"Code type": QR Code
"Data transfer regardless
of error result": Prohibit
1st position 6th position Error
Head position 6th position [STX]Q000512345[ETX]
Tail position 6th position [STX]Q000512345[ETX]
6th position Tail position [STX]Q000512345[ETX]
6th position By 10 positions [STX]Q000512345[ETX]
"Code type": QR Code
"Data transfer regardless
of error result": Permit
1st position 6th position [STX]Q000512345[ETX]
"Code type": PDF417
"Data transfer regardless
of error result": Prohibit
Invalid if specified. Invalid if specified. Error
"Code type": PDF417
"Data transfer regardless
of error result": Permit
Invalid if specified. Invalid if specified. [STX]Q000512345[ETX]