User`s manual

6
2.3 Breaking Bluetooth

Wireless Links
Holding down the trigger switch for 5 seconds or scanning the "Break Bluetooth

wireless link" QR Code symbol
forcibly breaks the scanner's Bluetooth

wireless link. (The QR Code symbol is given in Section 12.2 and its
procedure in Section 12.1.)
Note: Breaking the Bluetooth

wireless link does not disable the Bluetooth

interface. To disable it, scan the "End
operation" QR Code symbol.
2.4 Reestablishing Bluetooth

Wireless Links
When the scanner's Bluetooth

wireless link has been broken by any of the following events, pressing the trigger
switch reestablishes the Bluetooth

wireless link. The scanner as a slave waits for a connection request from the
master; the scanner as a master connects to a target slave.
- Scanning the "Break Bluetooth

wireless link" QR Code symbol (See Sections 12.1 and 12.2.)
- Holding down the trigger switch to break the Bluetooth

wireless link
- Modifying the scanner configuration with the configuration software (ScannerSetting_2D)
- "Reconnect request" dialog displayed by the configuration software (ScannerSetting_2D)
- Replacing the battery cartridge