User`s manual

Chapter 2 Bluetooth



Interface

For terms relating to Bluetooth



wireless communication in this manual, refer to Appendix 3 "Bluetooth



Glossary."

2.1 Enabling Bluetooth



Interface

Using the scanner for the first time requires scanning the "Start setting" and "Start operation" QR Code symbols given

in Section 12.2 with the procedure in Section 12.1. Using the scanner when the "End operation" is selected requires

scanning the "Start operation" QR Code symbol. Scanning those code symbols enables the Bluetooth



interface.

Note: Always disable this scanner's Bluetooth



interface in hospitals, aircraft, and other environments where the

Bluetooth



radio waves (2400 to 2483.5 MHz, maximum 2.5 mW) present a potential safety risk.

This scanner interprets the "End operation" QR Code symbol as a command to disable the Bluetooth



interface.

Note: When the scanner leaves the factory or it has scanned the "End operation" QR Code(in Section 13.2), it no

longer reads codes except the "Start operation" QR code, the " batch-process" QR code, and the barcode on the

reverse side of the Communications adapter (BA11/10-RKU).