User`s manual

1
Chapter 1 Names and Functions
Reading window
Bring this window to a
code to be scanned.
Trigger switch
Press this switch to read data or
initiate a Bluetooth
®
wireless link.
The following read modes are
available to match the needs of
the intended application.
• Auto-off mode
• Momentary switching mode
• Momentary switching mode
(Reverse Type)
• Alternate switching mode
• Continuous reading mode 1
• Continuous reading mode 2
• Auto sensing mode
• Auto stand mode
(The factory default setting is
auto-off mode.)
Refer to Chapter 5 for details.
• The Bluetooth
®
wireless link is
disconnected by holding down
the trigger switch. (Bluetooth
®
wireless link disconnection is
set to enable when shipped
from the factory.)
Indicator LED
Illuminates in blue when the scanner has read
a code successfully.
Refer to Section 7.2 for details.
If any error occurs, this LED flashes in red.
Built-in antenna
Bluetooth
®
antenna.
Do not modify this antenna
section or cover it by hand.
Battery cover
Remove this cover to replace
the battery cartridge.
Beep hole
The beeper sounds when the
scanner has read a code
successfully.