User`s manual

102
Chapter 13 QR-Coded Parameter Menu for Communications Adapters
(BA11/10-RKU)
13.1 Customizing the Communications Adapter from the Scanner
The scanner can customize the communications adapter by scanning the QR-coded parameter menu for
communications adapters and transferring their settings held in the scanner memory via the Bluetooth

wireless link
using the following procedure.
Scanner
Store the communications
adapter parameter settings
in the scanner memory.
Use the scanner to scan the QR-coded parameter menu designed for communications
adapters (Section 13.2) to store their parameter settings into the scanner memory.
Tip: Using the configuration software (ScannerSetting_2D) designed for scanners
also allows parameter settings for communications adapters. It, however, requires
connecting the adapter via a USB-COM or RS-232C interface to the host computer.
For details, refer to the "Communications Adapter User's Manual."

Communications adapter
Power the
communications adapter.
Power the communications adapter.
Note: Any type of interfaces that power the communications adapter can be used,
regardless of the interface setting made in the adapter. For the interfacing procedure,
refer to the "Communications Adapter User's Manual," Chapter 2.

Communications adapter
Switch to the setup mode.
Hold down the SETUP button provided on the bottom of the communications adapte
r
for at least 0.5 second with a pin or the like to switch to the setup mode.
Note: Leaving the communications adapter for 3 minutes or more after depression o
f
the SETUP button automatically exits the setup mode.
Communications adapter Interface/power supply LED: Flashes in orange
Bluetooth

status display LED (blue): Flashes slowly
(The communications adapter, as a slave, is waiting for a master to connect.)
Scanner
Establish the Bluetooth

wireless link.
Use the scanner holding communications adapter parameter settings to scan the ba
r
code printed on the bottom of the communications adapter.
Scanner's indicator LED: Flashes in blue
(The scanner beeps three times and initiates a Bluetooth

wireless link, as a master.)
Scanner 
Communications adapter
Transfer the
communications adapter
parameter settings.
After establishment of the Bluetooth

wireless link, the scanner inquires of the
communications adapter about the current status and transfers the communications
adapter parameter settings stored in the memory.
Note: If the scanner cannot receive an acknowledge response from the
communications adapter, it cancels the parameter setting sequence. Both the scanne
r
and communications adapter automatically return to standby for initiation of a
Bluetooth

wireless link.
Scanner Indicator LED: Lights in green
Communications adapter Bluetooth

status display LED (blue): Flashes rapidly