User`s manual

vii
Components Required
The scanner (AT27Q-SB) requires the following components that differ depending upon whether the communications
adapter is used and which interface is selected.
 When using the communications adapter (BA11/10-RKU)
Basic components
The table below lists the basic components required for the use of the communications adapter.
(1) Scanner AT27Q-SB
(2) Communications adapter BA11/10-RKU
(3) Charger CH-AT10L
(4) AC adapter AD2-1005/3000 For charger
Components required for individual interfaces
 For RS-232C interface
(5) RS-232C interface cable CBBA-RS2000/9
(6) AC adapter AD2-1005/3000 For communications adapter
 For RS-232C interface and communications adapter mounted in the charger
(5) RS-232C interface cable,
Charger built-in type
CBBA-RS2000/9-1
 For USB keyboard or USB-COM interface
(5) USB interface cable CBBA-US2000/4

 When directly communicating with Bluetooth-enabled equipment
(no BA11/10-RKU communications adapter is used)
(1) Scanner AT27Q-SB
(2) Charger CH-AT10L
(3) AC adapter AD2-1005/3000 For charger
Scanner
(AT27Q-SB)
Bluetooth

interface
Bluetooth

-enabled
computer
Charger
(CH-AT10L)
Bluetooth

interface
Host computer
AC adapter
(AD2-1005/3000)

USB keyboard interface

USB-COM keyboard interface

RS-232C keyboard interface
Communications
adapter
(BA11/10-RKU)