User`s manual

90
Items Parameters Defaults Refer to:
Search string and substitution string in data
substitution mode
Max. 16 ASCII characters No specified.
Number of splits in data blocksorting mode 2 to 5 splits 2
Split position in data blocksorting mode
0001 to 9999 positions, specified
by ASCII characters
Single
character
Order of blocks in data blocksorting mode Blocks 1 to 5
Block 1/
Block 2
AI split mode 
AI mode
AI parenthesis mode
Enable 
AI split mode
- Availability of AI #1
Disable
Enable
AI split mode
- Availability of AI #2
Disable 
Enable
AI split mode
- Availability of AI #3
Disable 
AI split mode
- AI #1
Selectable from AI candidates
(Note 2)
00
AI split mode
- AI #2
Selectable from AI candidates
(Note 2)
00
AI split mode
- AI #3
Selectable from AI candidates
(Note 2)
00
Header/Terminator 
Comma
AI split mode
- Delimiter
Tab (09h)
Section 6.2
(Note 2) For details about AI candidates, refer to Chapter 6, Section 6.2.1.3, "(3) AI table."
: Can be changed only with the configuration software.
(9) Switching to sleep mode for power saving and auto power-off
Items Parameters Defaults Refer to:
After 30 seconds
(Ordinary current mode)
Switching to sleep mode for power saving
Immediately
(Power saving mode)

Section 3.2
Disable 
Power save mode (Auto sense mode)
Short ~ Long
5 to 640 minutes 485 min.
Auto power-off
Disable
Section 3.2
: Can be changed only with the configuration software.