User`s manual

88
(12) Beeper, indicator LED, marker beam and illumination LEDs
Items Parameters Defaults Refer to:
Enable 
Beeper control
Disable
Low beeping tone (2.5 kHz)
Medium beeping tone (2.7 kHz) 
Beeping tone
High beeping tone (2.9 kHz)
Short (60 ms)
Medium (80 ms) 
Beeper beep time
Long (120 ms)
High 
Medium
Beeper volume
Low
Section 7.1
Single beep 
Scan complete sound
Multiple beep
Section 7.1
Enable 
Indicator LED control
Disable
Section 7.2
Marker-OFF mode
Normal marker mode 
Marker
Marker-ON mode
Section 7.3
Enable
Beeper sound when power turned ON
Disable 
Section 7.1
Turns off
Illumination LED
Turns on 
Section 7.4
Enable (Note 1) 
Power save mode
Disable
Section 7.4
(Note1) When “Power save mode” is enabled, a reading distance may be shorter under 500 lx ambient illumination.
: Can be changed only with the configuration software.