User`s manual

75
Items Parameters Defaults Refer to:
Enable √
Reading EAN-8
Disable
Sections 9.4 and
12.2
Enable √
EAN-8 transmission of check digit
Disable
Enable
EAN-8 Conversion to the EAN-13 format
Disable √
Enable
Reading UPC/EAN with 2-digit add-on
Disable √
Enable
Reading UPC/EAN with 5-digit add-on
Disable √
Enable
Reading UPC/EAN with add-on only
Disable √
Disabled checking √
Add-on check level
Levels 1 to 4
Sections 9.4 and
12.2
Interleaved 2of5
Items Parameters Defaults Refer to:
Enable, without a check digit √
Enable, with a check digit
(Check digit transmission enabled)
Enable, with a check digit
(Check digit transmission disabled)
Reading Interleaved 2of5
Disable
Section 12.2
Minimum number of readable digits
for Interleaved 2of5
4 digits
Maximum number of readable digits
for Interleaved 2of5
2 to 99 digits
99 digits
(See Note 1.)
Codabar (NW-7)
Items Parameters Defaults Refer to:
Enable, without a check digit √
Enable, with a check digit
(Check digit transmission enabled)
Enable, with a check digit
(Check digit transmission disabled)
Reading Codabar (NW-7)
Disable
Section 12.2
Minimum number of readable digits
for Codabar (NW-7)
4 digits
Maximum number of readable digits
for Codabar (NW-7)
3 to 99 digits
(including start/stop codes)
99 digits
(See Note 1.)
(Note 1) The parameter setting ranges are different from the numbers of digits that the scanner can actually read.
: Can be changed only with the configuration software.